ASROCK SIDE PANEL 13.3 FHD 60HZ IPS

13.3” IPS Panel

16:9 FHD Panel

Simple Connection

Variety of possibilities

Easy Installation

Step 1. Make sure you have a transparent tempered glass side panel for your PC case. The transparency of your side panel may affect the display quality of your eDP panel.

Step 2. Paste the bracket to the desired location on the internal side of the PC side panel. Press and hold the bracket for a few seconds to ensure adhesion.

Step 3. Install the other bracket on the top edge of the eDP panel. Hold the sides of the eDP panel assembly.
Obliquely insert it into the groove of the bottom bracket. Then carefully push it toward the glass panel until the top bracket is firmly adhered.

Step 4. Peel off the paper liners from the rubber strips. Do not touch the adhesive surface.
Paste the rubber strips closely along the edges of the eDP panel, so that the eDP panel is securely framed and won’t shift or slide.

Step 5. Connect the smaller end of the eDP cable to the eDP panel.

Step 6. Connect the other end of the cable to the 40-pin eDP connector on the motherboard.

• Panel Size (inch) – 13.3
• Aspect Ratio – 16:9
• Display Viewing Area (H x V) – 293.76 x 165.24
• Display Surface – Anti-Glare
• Backlight Type – LED
• Panel Type – IPS
• Pixel Pitch – 0.153mm
• Resolution – 1920 x 1080
• Brightness (Typ.) – 300 cd/m2
• Contrast Ratio (Typ.) – 800:1
• Display Colors – 16.7M (8 bit)
• Refresh Rate (Max) – 60 Hz
• Dimension (W x H x D) – 300.3 x 177.6 x 2.3 mm

Support List.

1700 : Intel Z790